User Manual

8
9. WATER RESISTANCE
Resistance when immersed in water under the following conditions:
ACTION CAMERA:
The camera without the case can resist immersion to a depth of 12 metres. Before immersion, make sure that
the covers on the side and bottom of the camera are properly closed. Covers and seals must be free from any
impurities such as dust, sand and alike. Do not open camera covers before the camera body is dry. If used in salt
water, rinse the camera with drinking water. Do not use any fabrics or external heat sources (hairdryer, micro-
wave oven, etc.) to dry, always allow the camera to dry gradually.
WATERPROOF CASE:
The case can resist immersion to a depth of 40 metres. Before using the camera in the case, make sure that
the rear door of the case is properly closed using the mechanism on the top of the case. The case door and seal
must be free of any impurities such as dust, sand and alike. When used in salt water, rinse the case with drinking
water. Do not use any fabrics or external heat sources (hairdryer, microwave oven, etc.) for drying, always allow
the case to dry gradually. When in the waterproof case, the touch screen of the camera display cannot be used,
and the camera must be operated using the buttons.
REMOTE CONTROL:
The remote control can resist immersion to a depth of 2 metres. Before immersion, make sure that the USB
cover on the underside of the control is properly closed. Do not open the cover before the remote control has
dried. Do not use external heat sources (hairdryer, microwave oven, etc.) for drying, allow the remote control to
dry gradually or use a small cloth.
10. SAFETY PRECAUTIONS
The consumer is required to learn the principles of safe use of the product before first use.
PRECAUTIONS AND NOTICES
– For your own safety, do not use the camera’s controls while driving.
– A window mount is needed when using the recorder in a car. Make sure that you place the recorder in an
appropriate place, so as not to obstruct the driver’s view or deployment of airbags.
– Make sure that no object is blocking the camera lens and no reflective material is placed near the lens. Please
keep the lens clean.
– If the car’s windshield is tinted or coated, it may impact the recording quality.
SAFETY PRECAUTIONS
– Do not use the charger in high moister environment. Never touch the charger when your hands or feet are
wet.
– Allow adequate ventilation around the charger when using it to operate the device or to charge the battery.
Do not cover the charger with paper or other objects that will reduce cooling. Do not use the charger while
it is inside a carrying case.
– Connect the charger to a proper power source. The voltage requirements are found on the product case and/
or on the packaging.
– Do not use the charger if it is visibly damaged. In case of damage, do not repair the equipment yourself!
– In case of device overheating, immediately disconnect the power source.
– Charge the device under supervision only.
– Packaging contains small pieces, that can be dangerous for children. Store the product always out of reach of
children. Bags or many of the pieces containing may cause suffocation after swallowing.