Use and Care Manual

101600
101600S
101600K
132106
132009
132108
125240
175500
132217
132350
251057
121280
175021
Lateral tolerance
– Easy positionig of the machine to the pencil mark
– No need for additional side stops and positioning aids
– Great flexibility when assembling by sliding in two directions simultaneously
(see large picture)
Same groove depth on both pieces
– Save time with every joint
– No changing of the depth means lower risk of errors
Well-proven cutting technology
– No tool change for 13 joining elements
– High precision even with high working speed
– Impossble for the tool to deflect
– Precise and clean groove even without suction
– Low maintanance cost and long machine life
– Only one tool to maintain, sharpen or replace
Thin joining element with low installation depth
– Ideal to join thin materials 8mm or 10mm at any angle
– Elements can't twist
– Low-cost joining elements
– Thin slot means minimal weakening of the material
Classic X
Well-proven, fast and
versatile in every application
The perfect joining system for easy,
fast and precise connections
Manufacturer:
Lamello AG
Verbindungstechnik
Hauptstrasse 149
CH–4416 Bubendorf
Tel. [phone]
Fax [phone]
[e-mail]
www.lamello.com
Classic X 08 / 12 Art. No. 9811005 EN
Kit contains
Machine with | carbide tipped cutter | suction stub |
stop square | spacer 4 mm | set of tools | manual |
wooden case, systainer or carton
Technical data
Power: 780W
Voltage: 230V or 120V
Speed: 10'000minˉ¹
Cutter: Carbide tipped cutter
100 × 4 × 22 mm
Teeth: Z6 (3+3) with reversing teeth
Cutting depth max: 20 mm
Weight: 3.0 kg
Art. No.
Carbide tipped groove cutter ................
Ø 100 ×
4 × 22 mm, Z6 alternating teeth,
without hub, with spacer, standard cutter
Carbide tipped groove cutter ................
Ø 78 ×
3 × 22 mm, Z4, 4 Screw holes,
with hub for biscuit H9
Carbide tipped groove cutter ................
with reversible blades Ø 100 ×
8 × 22 mm,
Z4 + V4, 4 screw holes,
for Clamex S -18 connector
Drill jig 30° – 150° ...................................
(60 mm) incl. drill,
for Clamex S -18 connector
Art. No.
Glue applicator Minicol .........................
The all purpose glue applicator with a sturdy
bottle base in solid wood
Mod. KS with plastic nozzle
Art. No.
Clamping set 20 cm ................................
Even pressure distribution guarantees
correct angle of workpiece
1 piece of clamps | 8 m belt |
4 pieces profile sections 20 cm
Art. No.
Carbide tipped cutters ...........................
Ø 100 ×
8 × 22 mm, Z4, 4 screw holes,
for Minispot patches size 2
Carbide tipped saw blades ....................
Ø 100 ×
2.4 × 22 mm, Z20, 4 screw holes,
2 spacers, for expansion gaps
Slide shoe ...............................................
to protect the wall and the machine
Edge trimming unit Nova ......................
For trimming of projecting wooden
and plastic edges 18 mm
Classic X Art. No.
in wooden case ...................................
in systainer ..........................................
in carton .............................................
Guaranteed supply
10 years on spare parts and accessories
Classic X
New
The most efficient system
to join panels
Accessories
Applications
glued connections | detachable furniture connections | shop fittings | interior fittings | trade shows | cutting expansion gaps |
wood repairs | tongue and groove connections for floors and room dividers