Hob LAM1902 User Manual www.howdens.
See back page for product serial number
Contents Safety information 4 Safety instructions 5 Installation 8 Product description 10 Daily use 12 Hints and tips 18 Care and cleaning 20 Troubleshooting 21 Technical data 23 Energy efficiency 23 Your guarantee 24 Subject to change without notice.
Safety information Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
• • • • • • • • • • WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking surfaces.
• • • • • • • • • • Remove all the packaging. Do not install or use a damaged appliance. Follow the installation instructions supplied with the appliance. Keep the minimum distance from other appliances and units. Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear. Seal the cut surfaces with a sealant to prevent moisture to cause swelling. Protect the bottom of the appliance from steam and moisture.
Use WARNING! Risk of injury, burns and electric shock. • • • • • • • • • • • Remove all the packaging, labelling and protective film (if applicable) before first use. This appliance is for household use only. Do not change the specification of this appliance. Make sure that the ventilation openings are not blocked. Do not let the appliance stay unattended during operation. Set the cooking zone to “off” after each use. Do not rely on the pan detector.
• Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use any abrasive products, abrasive cleaning pads, solvents or metal objects. Service • To repair the appliance contact an Authorised Service Centre. • Use original spare parts only. Disposal WARNING! Risk of injury or suffocation. • Contact your municipal authority for information on how to discard the appliance correctly. • Disconnect the appliance from the mains supply.
Assembly min. 28 mm min. 500mm min. 50mm min. 12 mm R 5mm min.
min. 60mm If the appliance is installed above a drawer, the hob ventilation can warm up the items stored in the drawer during the cooking process.
Control panel layout 1 2 3 4 5 11 6 7 9 10 8 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensor field Function Comment 1 ON / OFF To activate and deactivate the hob. 2 Lock / Child Safety Device To lock / unlock the control panel. 3 STOP+GO To activate and deactivate the function. - Heat setting display To show the heat setting. - Timer indicators of cooking zones To show for which zone you set the time.
Display Description The cooking zone operates. - STOP+GO operates. Automatic Heat Up operates. PowerBoost operates. + digit There is a malfunction. / OptiHeat Control (3 step Residual heat indicator): continue cooking / keep warm / residual heat. / Lock / Child Safety Device operates. Incorrect or too small cookware or no cookware on the cooking zone. Automatic Switch Off operates. OptiHeat Control (3 step Residual heat indicator) WARNING! / / There is a risk of burns from residual heat.
• you use incorrect cookware. The symbol comes on and the cooking zone deactivates automatically after 2 minutes. • you do not deactivate a cooking zone or change the heat setting. After some time comes on and the hob deactivates. The relation between the heat setting and the time after which the hob deactivates: Heat setting ,1-3 The hob deactivates after 6 hours 4-7 5 hours 8-9 4 hours 10 - 14 1.
Timer Count Down Timer You can use this function to set how long the cooking zone should operate for a single cooking session. First set the heat setting for the cooking zone then set the function. To set the cooking zone: touch cooking zone comes on. again and again until the indicator of a necessary To activate the function: touch of the timer to set the time (00 - 99 minutes). When the indicator of the cooking zone starts to flash slowly the time counts down.
The function has no effect on the operation of the cooking zones. STOP+GO This function sets all cooking zones that operate to the lowest heat setting. When the function operates, you cannot change the heat setting. The function does not stop the timer functions. To activate the function: touch . comes on. . The previous heat setting comes on. To deactivate the function: touch Lock You can lock the control panel while cooking zones operate. It prevents an accidental change of the heat setting.
• you put something on the control panel. Power management • Cooking zones are grouped according to the location and number of the phases in the hob. See the illustration. • Each phase has a maximum electricity loading of 3700 W. • The function divides the power between cooking zones connected to the same phase. • The function activates when the total electricity loading of the cooking zones connected to a single phase exceeds 3700 W.
Automatic modes Automatic light Boiling1) Frying2) Mode H0 Off Off Off Mode H1 On Off Off Mode H2 3) On Fan speed 1 Fan speed 1 Mode H3 On Off Fan speed 1 Mode H4 On Fan speed 1 Fan speed 1 Mode H5 On Fan speed 1 Fan speed 2 Mode H6 On Fan speed 2 Fan speed 3 1) The hob detects the boiling process and activates fan speed in accordance with automatic mode. 2) The hob detects the frying process and activates fan speed in accordance with automatic mode.
Activating the light You can set the hob to activate the light automatically whenever you activate the hob. To do so set the automatic mode to H1 – H6. The light on the hood deactivates 2 minutes after deactivating the hob. Hints and tips WARNING! Refer to Safety chapters. Cookware For induction cooking zones a strong electro-magnetic field creates the heat in the cookware very quickly. Use the induction cooking zones with suitable cookware.
The noises are normal and do not indicate any malfunction. Öko Timer (Eco Timer) To save energy, the heater of the cooking zone deactivates before the count down timer sounds. The difference in the operation time depends on the heat setting level and the length of the cooking operation. Examples of cooking applications The correlation between the heat setting of a zone and its consumption of power is not linear.
Hints and Tips for Hob²Hood When you operate the hob with the function: • • • • Protect the hood panel from direct sunlight. Do not spot halogen light on the hood panel. Do not cover the hob control panel. Do not interrupt the signal between the hob and the hood (e.g. with the hand, a cookware handle or a tall pot). See the picture. The hood in the picture is only exemplary. Other remotely controlled appliances may block the signal.
• Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. Clean the hob with a moist cloth and a non-abrasive detergent. After cleaning, wipe the hob dry with a soft cloth. • Remove shiny metallic discoloration: use a solution of water with vinegar and clean the glass surface with a cloth. Troubleshooting WARNING! Refer to Safety chapters. What to do if... Problem Possible cause Remedy You cannot activate or operate the hob.
Problem Possible cause Remedy You use a very tall pot which blocks the signal. Use a smaller pot, change the cooking zone or operate the hood manually. The zone is hot. Let the zone become sufficiently cool. The highest heat setting is set. The highest heat setting has the same power as the function. The heat setting changes between two levels. Power management operates. Refer to "Daily use". The sensor fields become hot. The cookware is too large or you put it too near to the controls.
glass ceramic (it is in the corner of the glass surface) and an error message that comes on. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period. The instructions about the Service Centre and conditions of guarantee are in the guarantee booklet. Technical data Rating plate Model LAM1902 Typ 62 D5A 01 AA Induction 7.35 kW Ser.Nr. .................
Diameter of circular cooking zones (Ø) Left front Left rear Middle front Right front 14.5 cm 21.0 cm 21.0 cm 14.5 cm 21.0 cm Energy consumption per cooking zone (EC electric cooking) Left front Left rear Middle front Right front Right rear 180.4 Wh / kg 177.5 Wh / kg 177.0 Wh / kg 180.2 Wh / kg 177.0 Wh / kg Energy consumption of the hob (EC electric hob) 178.
Call the Service Line on 0344 460 0006 Environmental concerns Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
867349062-D-092019 Product serial number (Place sticker here) ISSUE V4 260219