User manual

The door will be locked throughout the
delay time. If you wish to add laundry to the
appliance during the delay time, press the
Start/Pause button to pause the appliance.
When the indicator goes off , the door
can be opened. Add the laundry, close the
door and press Start/Pause button again.
Setting the delayed start
• Set the programme and the required
options.
• Set the delay start.
• Press Start/Pause button: the appliance
starts its hourly countdown. The
programme starts after the selected
delay has expired.
Cancelling the delayed start
• Press Start/Pause button to pause the
appliance;
• Press Delay Start button until the symbol
’ is displayed;
• Press Start/Pause button again to start
the programme.
The selected delay can be
changed only after you have set
the washing programme again.
The Delay Start cannot be set with the
Drain programme.
Altering an option or a running
programme
It is possible to change some options
before the programme operate. Before you
make any change, you must press Start/
Pause button to pause the appliance.
Changing a running programme is possible
only by resetting it.
Turn the programme dial to Off and then to
the new programme position.
Press Start/Pause button again to start the
new programme. The washing water in the
tub will not be drained.
Interrupting a programme
Press Start/Pause button to interrupt a
programme which is running, the
corresponding indicator starts flashing.
Press Start/Pause button again to restart
the programme.
Cancelling a running
programme
Turn the selector dial to Off to cancel a
programme which is running. Now you can
select a new programme.
Before starting the new
programme the appliance could
drain the water. In this case,
make sure that the detergent is
still in the detergent
compartment, if not fill the
detergent again.
Opening the door
When the appliance is operating and during
the delay time, the door is locked.
Press firstly Start/Pause button to pause
the appliance:
• If the indicator disappears, after a
few minutes goes off, the door can be
opened.
• If the indicator
stays on and the door
remains locked, this means that the
appliance is already heating or that the
water level is too high. In this case the
door cannot be opened.
If, for any reason, it is necessary to open
the door, turn the programme dial to Off to
switch the appliance off. After a few
minutes the door can be opened (pay
attention to the water level and
temperature !) .
After closing the door, it is necessary to
select the programme and the options
again. Press Start/Pause button to start the
programme again.
At the end of the programme
The appliance stops automatically. The
indicator of Start/Pause button goes off. A
flashing will appear on the display. Some
acoustic signals sound.
15