Manual

Temperature Coefficient

The temperature coefficient is the amount of change in

conductivity per degree of temperature; it is expressed in

percent per °C. Entering the exact temperature

coefficient of the solution being measured will accurately

compensate the temperature for almost any solution. The

temperature coefficient can be set between 0.0 and 3.0 %

per °C. The meter default is 2.1% per °C.

6. Enter Advanced Set-up.

7. Press or button until [t.Co %] appears on the

LCD. Press ENTER button.

8. Press or button to select a value between 0.0 and

3.0.

9. Press ENTER button to select. The meter will return

to the menu, [t.Co %].

Press or button to move to the next menu or press CAL to exit to the

measurement mode.

Normalization Temperature

The meter can be set to normalize the conductivity measurements to a

standard temperature of either 25 °C or 20 °C.

The default value is 25 °C.

1. Enter Advanced Set-up.

2. Press or button until [t.nr °C] appears on the

LCD. Press ENTER button.

3. Press or button to select either [25.0 °C]or[20.0

°C].

4. Press ENTER button to select. The meter will return

to the menu, [t.nr °C].

5. Press or button to move to the next menu or

press CAL to exit to the measurement mode.

Press ENTER to confirm selection; or

Press CAL to escape without confirming selection

HOLD

ENTER

Press ENTER to confirm selection; or

Press CAL to escape without confirming selection

C°

HOLD

ENTER