Owner's manual

SMART Spectro Operator’s Manual 2.11 25
will then move the grating a precise predetermined amount from this position.
This precise movement will cause the grating to be positioned at 546 nm every
time. Once calibrated the wavelength displayed during testing is accurate to ±2
nm. When the wavelength calibration is complete the display will go back to the
Main Menu.
PROGRAMMED TESTS
 INTRODUCTION
The PROGRAMMED TESTS mode is used to run all LaMotte pre-programmed
tests and USER TESTS. This is also where USER TESTS and SEQUENCES are
set-up and edited.
1. Press ON. The LaMotte logo
screen will appear for about 2
seconds and the MAIN MENU will
appear.
MAIN MENU 12:00:01
*
CALIBRATE WL
PROGRAMMED TESTS
%T/ABS
PC LINK
2. Press or to scroll to
PROGRAMMED TESTS.
MAIN MENU 12:00:01
CALIBRATE WL
*
PROGRAMMED TESTS
%T/ABS
PC LINK
3. Press *ENTER to select
PROGRAMMED TESTS. In
the PROGRAMMED TESTS
menu there are three alterable
sequences and one ALL TESTS
fi xed sequence as well as the EDIT
function.
MAIN MENU 12:00:01
*
CALIBRATE WL
PROGRAMMED TESTS
%T/ABS
PC LINK