Owner's manual

40 SMART Spectro Operator’s Manual 2.11
 ENTERING A NEW CALIBRATION
1. Press to scroll to NEW
CALIBRATION.
102 H2O
NAME THE TEST
SELECT WL
*
NEW CALIBRATION
FORMAT RESULT
2. Press *ENTER to select NEW
CALIBRATION.
INPUT DATA NUMBERS
DATA NUMBERS = 5
SET PRESS ENTER
3. Press or to select the
number of data points that will
be used to create the calibration
curve. The maximum number of
data points is 8.
INPUT DATA NUMBERS
DATA NUMBERS = 6
SET PRESS ENTER
4. Press *ENTER to save the
selection.
NEW CALIBRATION
*
ENTER STD.1
ENTER STD.2
ENTER STD.3
ENTER STD.4
5. Press *ENTER to select the fi rst
data point.
ENTER STD. 1
*
SCAN BLANK
STD.1 =
!0123456789.