Product Manual

Section 13 - Service / Maintenance
Visit our website at: www.lanair.com
43
Fuel By-Pass Regulator
Diaphragm Replacement
1. Disconnect power to the heater.
2. Remove the locking nut and adjusting
screw from the by-pass regulator
assembly.
3. Disassemble the by-pass regulator and
discard the small plug, spring, large
plug. washer and diaphragm.
4. Thoroughly clean and dry remaining
parts.
5. Re-assemble using new small plug,
spring large plug washer and
diaphragm (Kit P/N 9874).
NOTE: Pay close attention to the posi-
tions of the large and small plugs.
adjusting screw
locking nut
cap
small plug
spring
large plug
washer
diaphragm
body
Fuel By-Pass Regulator Assembly