SDS

ManualsBrandsLanco ManualsGlues & Epoxy32 fl. oz. High-Tech Contact Cement

SAFETY DATA SHEET

1. PRODUCT AND COMPANY IDENTIFICATION

Manufacturer

LANCO MFG.CORP.

URB. APONTE # 5

SAN LORENZO, PUERTO RICO, 00754

787-736-4221

24 HR. Emergency Telephone Number

CHEMTREC (US Transportation):1 (800)424-9300

CHEMTREC (International : 1(703)527-3887

Transportation)

2. HAZARDS IDENTIFICATION

Classification (substance or mixture):

Category 2 (Flammable liquid)

Category 2 Skin Corrosion / Irritation

Category 2A Eyes irritation

Category 1 Germ Cell Mutagenicity

Category 2 Toxic to Reproduction

Category 3 Target organ Systemic Toxicity (single exposure)

Category 1 Aspiration toxicity

Category 3 Carcinogenicity

GHS Label Elements:

Signal Word: Danger

Hazard Statements:

H336 May cause drowsiness or dizziness.

H361 Suspected of damaging fertility or the unborn child .

H319 Causes serious eye irritation.

H315 Causes skin irritation.

H304 May be fatal if swallowed and enters airways.

H225 Highly flammable liquid and vapor.

H373 May cause damage to organs through prolonged or repeated exposure.

DATE PRINTED 6/26/2015

SDS REF. No : CA-900

Product Name: HIGH-TECH CONTACT CEMENT

Product Code: CA-900

Summary of content (10 pages)

PAGE 1
SAFETY DATA SHEET DATE PRINTED SDS REF. No : 6/26/2015 CA-900 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: Product Code: HIGH-TECH CONTACT CEMENT CA-900 Manufacturer LANCO MFG.CORP. URB. APONTE # 5 24 HR. Emergency Telephone Number CHEMTREC (US Transportation):1 (800)424-9300 CHEMTREC (International : 1(703)527-3887 Transportation) SAN LORENZO, PUERTO RICO, 00754 787-736-4221 2.
PAGE 2
Precautionary Statement: P281 Use personal protective equipment as required. P280 Wear protective gloves/protective clothing/eye protection/face protection. P271 Use only outdoors or in a well-ventilated area. P270 Do not eat, drink or smoke when using this product. P264 Wash hands thoroughly after handling. P261 Avoid breathing dust/fume/gas/mist/vapors/spray. P260 Do not breathe dust/fume/gas/mist/vapors/spray. P243 Take precautionary measures against static discharge. P242 Use only non-sparking tools.
PAGE 3
center immediately. Never give anything by mouth to an unconscious person. Inhalation: If affected, remove from exposure. Restore breathing. Keep warm and quiet. Notes To Physician: Summon professional firefighters. Use full protective equipment including self-contained breathing apparatus. water spray may be ineffective. If water is used, fog nozzles are preferable. 5. FIREFIGHTING MEASURES Suitable Extinguishing Media: Carbone Dioxide, Dry Chemical, Foam, Water Fog.
PAGE 4
vapors, spray mist or sanding dust. In case of insufficient ventilation, wear suitable respiratory equipment. Conditions For Safe Storage, Including Incompatibilities: Handle containers carefully to prevent damage and spillage. Incompatible materials: Alkaline materials, strong acid and oxidizing materials. Store in original containers at temperatures between 5 ºC and 25 ºC. Keep away from heat, sparks and open flame. Protect from freezing and direct sunlight. Keep containers tightly closed.
PAGE 5
personal protective equipment, which performs satisfactorily and meet OSHA or other recognized standards. Consult with local procedures for selection, training, inspection and maintenance of the personal protective equipment. Personal Protective Equipment: Respiratory Protection: In case of insufficient ventilation wear suitable respiratory equipment. Eyes Protection: Safety glasses with side-shields.
PAGE 6
Partition Coefficient: Not available pH: Not applicable Decomposition Temperature: Not available Coating VOC (gm/l): 692 Material VOC (gm/l): 692 10. STABILITY AND REACTIVITY Chemical Stability: Stable Possibility Of Hazardous Reactions: None under normal condition of use. Conditions To Avoid: Poor ventilation. Materials To Avoid: Keep away from the following materials to prevent strong exothermic reaction: oxidizing agents, strong alkalis, strong acids.
PAGE 7
Toxicity Values: No information available. TOXICOLOGICAL INFORMATION Heat Reactive Phenolic Resin(MIXTURE) Ethyl Benzene LD50 Dermal Rabbit 4100 mg/kg LD50 Oral Rat 3500 mg/kg LCLO Inhalation Rat 4000 ppm / 4hrs Formaldehyde LD50 Dermal Rabbit 270 mg/kg LD50 Oral Rat 100 mg/kg LC50 Inhalation Rat 165 ppm Xylene LD50 Dermal Rabbit >1700 mg/kg LD50 oral Rat 4300 mg/kg LC50 Inhalation Rat 5000 ppm / 4hrs Methylbenzene(108-88-3) LD50 Rat.
PAGE 8
Persistence And Degradability: No information available. Bio-Accumulative Potential: No information available. Mobility In Soil: No information available. Other Adverse Effects: No information available. Eco-toxicological Other Information: No information available. ECOLOGICAL INFORMATION 13. DISPOSAL CONSIDERATIONS Disposal Method: Consult with the US EPA Guidelines listed in 40 CFR Part 261.3 for the classifications of hazardous waste prior to disposal.
PAGE 9
Fire: Yes Pressure Generating: No Reactivity: No Acute: Yes Chronic: Yes 313 Reportable Ingredients: This product contains a chemical or chemicals which are subject to the reporting requirements of section 313 of title 40 CFR 372. 313 REPORTABLE INGREDIENTS Chemical Name *Methylbenzene *Heat Reactive Phenolic Resin 302/304 Emergency Planning Emergency Plan: No State Regulations: No Other Govt. Regulations: No Weight % 50.9648 7.
PAGE 10
16. OTHER INFORMATION NFPA CODES HMIS RATING Health : 2 Flammability : 2 Reactivity : 0 Personal Protection : H DATE CREATED 2 2 0 06-22-15 Revision Indicator: None Manufacturer Disclaimer: The information contained herein is based on data believed by this company to be accurate, but we do not assume any liability for its accuracy. We neither suggest nor guaranteed that any hazards mentioned are the only ones which exist.