SDS

vapors, spray mist or sanding dust. In case of insufficient ventilation, wear suitable respiratory
equipment.
Conditions For Safe Storage, Including Incompatibilities: Handle containers carefully to
prevent damage and spillage. Incompatible materials: Alkaline materials, strong acid and
oxidizing materials.
Store in original containers at temperatures between 5 ºC and 25 ºC. Keep away from heat,
sparks and open flame. Protect from freezing and direct sunlight. Keep containers tightly closed.
Ensure that waste and contaminated materials are collected and removed from the work area as
soon as possible in a suitably labeled container.
8. EXPOSURE CONTROLS\PERSONAL PROTECTION
Exposure Limits
Components
CAS Limits
Methylbenzene 108-88-3 ACGIH TWA 20 ppm, OSHA
TWA 200 ppm
OSHA Z1 TWA 100 ppm,
STEAL 150ppm
NIOSH TWA 100ppm, STEAL
150ppm
Heat Reactive Phenolic Resin MIXTURE Formaldehyde CAS#50-00-0
,500ppm ACGIH TLV-C
0.3ppm, OSHA STEL 2ppm
OSHA TWA 0.75ppm
Ethyl Benzene CAS#100-41-4
0.1-0.4% ACGIH STEL
100ppm, ACGIH TWA
100ppm
OSHA TWA 100ppm
Xylene CAS#1330-20-7 1-
2% ACGIH STEL 150ppm,
ACGIH TWA 100ppm
OSHA TWA 100ppm
Magnesium Oxide Dust 1309-48-4 OSHA PEL - 5 mg/m3
(respirable particulates), 15
mg/m3 (total particulates)
ACGIH TLV - 10 mg/m3 (total
particulates)
Engineering Controls: Use appropriate engineering control such as process enclosures,
local exhaust ventilation, or other engineering controls to control airborne levels below
recommended exposure limits. Good general ventilation should be sufficient to
control airborne levels. Where such system are not effective wear suitable