SDS

Components
CAS Limits
Calcium Carbonate 471-34-1 OSHA PEL: 15 mg/m3
ACGIH TLV: 10 mg/m3
Dibutyl Phthalate 84-74-2 OSHA PEL 5 mg/3
ACGIH TLV TWA 5 mg/m3
Titanium Dioxide 13463-67-7 OSHA PEL 15 mg/m3 TWA
(Dust)
ACGIH TLV 10 mg/m3 TWA
(Dust)
Stoddard Solvent 8052-41-3 ACGIH 100 ppm TWA
NIOSH REL 350 mg/m3
OSHA Z1 PEL 2900 mg/m3
Ethylene Glycol 107-21-1 ACGIH 100mg/m3
Ammonium Hydroxide Solution 1336-21-6 OSHA 35 ppm, 27 mg/m3
STEL, 15 minutes
25 ppm, 18 mg/m3 PEL
ACGIH 25 ppm, 18 mg/m3
TLV, 8 hour TWA
35 ppm, 27 mg/m3 STEL, 15
minutes
Engineering Controls: Use appropriate engineering control such as process enclosures,
local exhaust ventilation, or other engineering controls to control airborne levels below
recommended exposure limits. Good general ventilation should be sufficient to
control airborne levels. Where such system are not effective wear suitable
personal protective equipment, which performs satisfactorily and meet OSHA
or other recognized standards. Consult with local procedures for selection,
training, inspection and maintenance of the personal protective equipment.
Personal Protective Equipment:
Respiratory Protection: In case of insufficient ventilation wear suitable respiratory equipment.
Eyes Protection: Safety glasses with side-shields.
Skin Protection: Chemical -resistance gloves and chemical goggles, face-shield and
synthetic apron or coveralls should deb used to prevent contact with eyes, skin or clothing.
Work Hygienic Practices: Ensure shower and eyewash station are available. Use good personal
hygiene practices. Wash hand before eating, drinking. Promptly remove soiled clothing and wash
thoroughly before reuse.
Other Use Precautions: None
Comments: No information available.
9. PHYSICAL AND CHEMICAL PROPERTIES