SDS
Table Of Contents
- Safety data sheet of DC-3045 - DRY COAT SMOOTH S/GLOSS W/ PASTEL (Version 1)
- 1 - IDENTIFICATION
- 2 - HAZARD(S) IDENTIFICATION
- 3 - COMPOSITION/INFORMATION ON INGREDIENTS
- 4 - FIRST-AID MEASURES
- 5 - FIRE-FIGHTING MEASURES
- 6 - ACCIDENTAL RELEASE MEASURES
- 7 - HANDLING AND STORAGE
- 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION
- 9 - PHYSICAL AND CHEMICAL PROPERTIES
- 10 - STABILITY AND REACTIVITY
- 11 - TOXICOLOGICAL INFORMATION
- 12 - ECOLOGICAL INFORMATION
- 13 - DISPOSAL CONSIDERATIONS
- 14 - TRANSPORT INFORMATION
- 15 - REGULATORY INFORMATION
- 16 - OTHER INFORMATION
DC-3045 - DRY COAT SMOOTH S/GLOSS W/ PASTEL
Safety data sheet
according to 29 CFR 1910.1200
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS (continued)
Identification
Chemical name/Classification
Concentration
CAS:
7732-18-5
Water
25 - <50 %
CAS:
13463-67-7
Titanium dioxide
Carc. 2: H351 - Warning
10 - <25 %
CAS:
178037-05-3
Acrylic polymer
10 - <25 %
CAS:
37244-96-5
Nepheline syenite
1 - <2.5 %
CAS:
112-34-5
2-(2-butoxyethoxy)ethanol
Eye Irrit. 2: H319; Flam. Liq. 4: H227 - Warning
1 - <2.5 %
CAS:
8031-18-3
Fuller´s Earth
Acute Tox. 4: H302 - Warning
<1 %
To obtain more information on the hazards of the substances consult sections 8, 11, 12, 15 and 16.
SECTION 4: FIRST-AID MEASURES
4.1
Description of necessary measures:
The symptoms resulting from intoxication can appear after exposure, therefore, in case of doubt, seek medical attention for
direct exposure to the chemical product or persistent discomfort, showing the SDS of this product.
By inhalation:
This product does not contain substances classified as hazardous for inhalation, however, in case of symptoms of intoxication
remove the person affected from the exposure area and provide with fresh air. Seek medical attention if the symptoms get worse
or persist.
By skin contact:
In case of contact it is recommended to clean the affected area thoroughly with water and neutral soap. In case of modifications
on the skin (stinging, redness, rashes, blisters,…), seek medical advice with this Safety data Sheet
By eye contact:
Rinse eyes thoroughly with water for at least 15 minutes. If the injured person uses contact lenses, these should be removed
unless they are stuck to the eyes, as this could cause further damage. In all cases, after cleaning, a doctor should be consulted
as quickly as possible with the SDS of the product.
By ingestion/aspiration:
Do not induce vomiting, but if it does happen keep the head down to avoid aspiration. Keep the person affected at rest. Rinse
out the mouth and throat, as they may have been affected during ingestion.
4.2
Most important symptoms/effects, acute and delayed:
Acute and delayed effects are indicated in sections 2 and 11.
4.3
Indication of immediate medical attention and special treatment needed, if necessary:
Non-applicable
SECTION 5: FIRE-FIGHTING MEASURES
5.1
Suitable (and unsuitable) extinguishing media:
Product is non-flammable under normal conditions of storage, manipulation and use, but the product contains flammable
substances. In the case of inflammation as a result of improper manipulation, storage or use preferably use polyvalent powder
extinguishers (ABC powder), in accordance with the Regulation on fire protection systems. IT IS NOT RECOMMENDED to use full
jet water as an extinguishing agent.
5.2
Specific hazards arising from the chemical:
As a result of combustion or thermal decomposition reactive sub-products are created that can become highly toxic and,
consequently, can present a serious health risk.
5.3
Special protective equipment and precautions for fire-fighters:
Depending on the magnitude of the fire it may be necessary to use full protective clothing and individual respiratory equipment.
Minimum emergency facilities and equipment should be available (fire blankets, portable first aid kit,...)
Additional provisions:
Page 2/9
Date of compilation: 6/10/2019 Version: 1
- CONTINUED ON NEXT PAGE -