SDS

DC-3045 - DRY COAT SMOOTH S/GLOSS W/ PASTEL
Safety data sheet
according to 29 CFR 1910.1200
SECTION 5: FIRE-FIGHTING MEASURES (continued)
As in any fire, prevent human exposure to fire, smoke, fumes or products of combustion. Only properly trained personnel should
be involved in firefighting. Evacuate nonessential personnel from the fire area. Destroy any source of ignition. In case of fire,
refrigerate the storage containers and tanks for products susceptible to inflammation. Avoid spillage of the products used to
extinguish the fire into an aqueous medium.
SECTION 6: ACCIDENTAL RELEASE MEASURES
6.1
Personal precautions, protective equipment and emergency procedures:
Isolate leaks provided that there is no additional risk for the people performing this task. Personal protection equipment must be
used against potential contact with the spilt product (See section 8). Evacuate the area and keep out those who do not have
protection.
6.2
Environmental precautions:
This product is not classified as hazardous to the environment. Keep product away from drains, surface and underground water.
6.3
Methods and materials for containment and cleaning up:
It is recommended:
Absorb the spillage using sand or inert absorbent and move it to a safe place. Do not absorb in sawdust or other combustible
absorbents. For any concern related to disposal consult section 13.
6.4
Reference to other sections:
See sections 8 and 13.
SECTION 7: HANDLING AND STORAGE
7.1
Precautions for safe handling:
A.-
Precautions for safe manipulation
Comply with the current standards 29 CFR 1910 Occupational Safety and Health Standards. Keep containers hermetically
sealed. Control spills and residues, destroying them with safe methods (section 6). Avoid leakages from the container.
Maintain order and cleanliness where dangerous products are used.
B.-
Technical recommendations for the prevention of fires and explosions
Product is non-flammable under normal conditions of storage, manipulation and use. It is recommended to transfer at slow
speeds to avoid the generation of electrostatic charges that can affect flammable products. Consult section 10 for information
on conditions and materials that should be avoided.
C.-
Technical recommendations to prevent ergonomic and toxicological risks
Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.
D.-
Technical recommendations to prevent environmental risks
It is recommended to have absorbent material available at close proximity to the product (See subsection 6.3)
7.2
Conditions for safe storage, including any incompatibilities:
A.-
Technical measures for storage
B.-
General conditions for storage
Avoid sources of heat, radiation, static electricity and contact with food. For additional information see subsection 10.5
7.3
Specific end use(s):
Except for the instructions already specified it is not necessary to provide any special recommendation regarding the uses of this
product.
Minimum Temp.:
41 ºF
Maximum Temp.:
86 ºF
Maximum time:
6 Months
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1
Control parameters:
Substances whose occupational exposure limits have to be monitored in the workplace
Page 3/9
Date of compilation: 6/10/2019 Version: 1
- CONTINUED ON NEXT PAGE -