Instructions / Assembly

GENERAL SPECIFICATIONS
Fabric Size: 3” to 48“
by 150” ROLL
Applicable
Specifications: ASTM
D-1668-86
Type I
Average
Net Weight
(oz.yd2): 2.05
Average
tensile strength
per 1” width: Warp: 85 min.
Fill: 85 min.
Treatment %
on fabric: 28%
Thread count per
inch of width: Warp: 20 +/- 1
Fill: 10 +/- 1
Thickness
(average): .005 inch
Technical Data
Soft Finishing Stitch Bonded Fiberglass Fabric
Application
Apply a film of liquid membrane to surface to be
treated in accordance with manufacturer’s
specifications. Embed fiberglass fabric into the
wet coating using a soft bristle brush, broom or
roller using sufficient pressure to force mesh into
wet membrane through the mesh openings and
around fabric strands. Conform the fabric
uniformly to the surface. Avoid overstretching,
bridging or “fishmouths” in fabric. Apply a final
coat of liquid membrane over entire surface in
accordance with manufacturers recommendations
and ensuring fabric mesh is not visible.
Fiberglass Mesh FM-995
Reinforcing Mesh
Product Description
A uniformly distributed membrane of fiberglass
threads woven in perpendicular pattern and
coated with an organic polymeric binder. Large
mesh openings provide improved saturation of
roofing membrane and better penetration of wet
coating. Compatible with water based
elastomeric coatings. Product is lighter and has
higher tensile strength than cotton-based
reinforcing fabric mesh. Fiberglass will not rot
and is mold, algae and mildew resistant. May be
used to patch tennis court surfaces, insulate and
wrap pipes, on roofing systems and for damp
proofing and waterproofing.
Basic Uses
• Water based coatings
• Acrylic elastomeric roof membranes
• Asphalt membranes
• Acrylic emulsions
• Solvent type coatings
• Mastics