SDS
MD-863 - AQUA PROOF MEMBRANE BLACK
Safety data sheet
according to 29 CFR 1910.1200
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS (continued)
Identification
Chemical name/Classification
Concentration
CAS:
471-34-1
Calcium Carbonate
10 - <25 %
To obtain more information on the hazards of the substances consult sections 8, 11, 12, 15 and 16.
SECTION 4: FIRST-AID MEASURES
4.1
Description of necessary measures:
The symptoms resulting from intoxication can appear after exposure, therefore, in case of doubt, seek medical attention for
direct exposure to the chemical product or persistent discomfort, showing the SDS of this product.
By inhalation:
This product does not contain substances classified as hazardous for inhalation, however, in case of symptoms of intoxication
remove the person affected from the exposure area and provide with fresh air. Seek medical attention if the symptoms get worse
or persist.
By skin contact:
In case of contact it is recommended to clean the affected area thoroughly with water and neutral soap. In case of modifications
on the skin (stinging, redness, rashes, blisters,…), seek medical advice with this Safety data Sheet
By eye contact:
This product does not contain substances classified as hazardous for eye contact. Rinse eyes thoroughly for at least 15 minutes
with lukewarm water, ensuring that the person affected does not rub or close their eyes.
By ingestion/aspiration:
In case of consumption, seek immediate medical assistance showing the SDS of this product.
4.2
Most important symptoms/effects, acute and delayed:
Acute and delayed effects are indicated in sections 2 and 11.
4.3
Indication of immediate medical attention and special treatment needed, if necessary:
Non-applicable
SECTION 5: FIRE-FIGHTING MEASURES
5.1
Suitable (and unsuitable) extinguishing media:
Product is non-flammable under normal conditions of storage, manipulation and use. In the case of inflammation as a result of
improper manipulation, storage or use preferably use polyvalent powder extinguishers (ABC powder), in accordance with the
Regulation on fire protection systems. IT IS NOT RECOMMENDED to use full jet water as an extinguishing agent.
5.2
Specific hazards arising from the chemical:
As a result of combustion or thermal decomposition reactive sub-products are created that can become highly toxic and,
consequently, can present a serious health risk.
5.3
Special protective equipment and precautions for fire-fighters:
Depending on the magnitude of the fire it may be necessary to use full protective clothing and individual respiratory equipment.
Minimum emergency facilities and equipment should be available (fire blankets, portable first aid kit,...)
Additional provisions:
As in any fire, prevent human exposure to fire, smoke, fumes or products of combustion. Only properly trained personnel should
be involved in firefighting. Evacuate nonessential personnel from the fire area. Destroy any source of ignition. In case of fire,
refrigerate the storage containers and tanks for products susceptible to inflammation. Avoid spillage of the products used to
extinguish the fire into an aqueous medium.
SECTION 6: ACCIDENTAL RELEASE MEASURES
6.1
Personal precautions, protective equipment and emergency procedures:
Isolate leaks provided that there is no additional risk for the people performing this task. Personal protection equipment must be
used against potential contact with the spilt product (See section 8). Evacuate the area and keep out those who do not have
protection.
6.2
Environmental precautions:
This product is not classified as hazardous to the environment. Keep product away from drains, surface and underground water.
Page 2/8
Date of compilation: 9/26/2019 Version: 1
- CONTINUED ON NEXT PAGE -