SDS

7. HANDLING AND STORAGE
Precaution For Safe Handling: Avoid contact with skin, eyes and clothing. Avoid breathing
vapors, spray mist or sanding dust. In case of insufficient ventilation, wear suitable respiratory
equipment.
Conditions For Safe Storage, Including Incompatibilities: Handle containers carefully to
prevent damage and spillage. Incompatible materials: Alkaline materials, strong acid and
oxidizing materials.
Store in original containers at temperatures between 5 ºC and 25 ºC. Keep away from heat,
sparks and open flame. Protect from freezing and direct sunlight. Keep containers tightly closed.
Ensure that waste and contaminated materials are collected and removed from the work area as
soon as possible in a suitably labeled container.
8. EXPOSURE CONTROLS\PERSONAL PROTECTION
Exposure Limits
Components
CAS Limits
Alkyd Resin 70% MIXTURE OSHA TWA 100ppm, ACGIH
TWA 100ppm
OSHA Z1 PEL 500ppm
Stoddard Solvent 8052-41-3 ACGIH 100 ppm TWA
NIOSH REL 350 mg/m3
OSHA Z1 PEL 2900 mg/m3
Naphtha Aliphatic Light 64742-89-8 OSHA P0 twa 400 ppm
OSHA Z1 twa 500 ppm
Oil Modified Phenolic MIXTURE ACGIH TLV - TWA 100 ppm
OSHA PEL - TWA 500 ppm
Engineering Controls: Use appropriate engineering control such as process enclosures,
local exhaust ventilation, or other engineering controls to control airborne levels below
recommended exposure limits. Good general ventilation should be sufficient to
control airborne levels. Where such system are not effective wear suitable
personal protective equipment, which performs satisfactorily and meet OSHA
or other recognized standards. Consult with local procedures for selection,
training, inspection and maintenance of the personal protective equipment.
Personal Protective Equipment:
Respiratory Protection: In case of insufficient ventilation wear suitable respiratory equipment.
Eyes Protection: Safety glasses with side-shields.