SDS

ManualsBrandsLanco ManualsBuilding materials5 Gal. White Seal Plus Reflective Roof Coating

RC-886 - WHITE SEAL PLUS

Safety data sheet

according to 29 CFR 1910.1200

SECTION 1: IDENTIFICATION

1.1

GHS Product identifier:

RC-886 - WHITE SEAL PLUS

1.2

Recommended use of the chemical and restrictions on use:

Relevant uses: Acrylic paint

Uses advised against: All uses not specified in this section or in section 7.3

1.3

Name, address, and telephone number of the chemical manufacturer, importer, or other responsible party:

Lanco Manufacturing Corp.

Urb. Aponte #5

00754 San Lorenzo - Puerto Rico - Estados Unidos

Phone.: +1-787-736-4221 - Fax: +1-787-736-5313

info@lancopaints.com

http://www.lancopaints.com

1.4

Emergency phone number:

CHEMTREC (US Transportation) +1-800-424-9300 | CHEMTREC (International Transportation) +1

-703-527-3887

SECTION 2: HAZARD(S) IDENTIFICATION

2.1

Classification of the substance or mixture:

NFPA:

Health Hazards: 1

Flammability Hazards: 0

Instability Hazards: 0

Special Hazards: Non-applicable

29 CFR 1910.1200:

Classification of this product has been carried out in accordance with paragraph (d) of § 1910.1200.

Carc. 2: Carcinogenicity, Category 2, H351

Skin Sens. 1: Sensitisation, skin, Category 1, H317

2.2

Label elements:

NFPA:

29 CFR 1910.1200:

Warning

Hazard statements:

Carc. 2: H351 - Suspected of causing cancer

Skin Sens. 1: H317 - May cause an allergic skin reaction

Precautionary statements:

P101: If medical advice is needed, have product container or label at hand

P102: Keep out of reach of children

P201: Obtain special instructions before use

P261: Avoid breathing dust/fume/gas/mist/vapours/spray

P280: Wear protective gloves/protective clothing/eye protection/face protection

P302+P352: IF ON SKIN: Wash with plenty of soap and water

P308+P313: IF exposed or concerned: Get medical advice/attention

P501: Dispose of contents and / or their container according to the separated collection system used in your municipality

Substances that contribute to the classification

Titanium dioxide; Aliphatic polyurethane polymer

2.3

Other hazards which do not result in classification:

Non-applicable

Page 1/9

Date of compilation: 10/29/2019 Version: 1

- CONTINUED ON NEXT PAGE -

Summary of content (9 pages)

PAGE 1
Safety data sheet according to 29 CFR 1910.1200 RC-886 - WHITE SEAL PLUS SECTION 1: IDENTIFICATION 1.1 GHS Product identifier: RC-886 - WHITE SEAL PLUS 1.2 Recommended use of the chemical and restrictions on use: Relevant uses: Acrylic paint Uses advised against: All uses not specified in this section or in section 7.3 1.3 1.4 Name, address, and telephone number of the chemical manufacturer, importer, or other responsible party: Lanco Manufacturing Corp. Urb.
PAGE 2
Safety data sheet according to 29 CFR 1910.1200 RC-886 - WHITE SEAL PLUS SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1 Substances: Non-applicable 3.2 Mixtures: Chemical description: Aqueous mixture composed of chemical products for cleaning products Components: Remaining components are non-hazardous and/or present at amounts below reportable limits.
PAGE 3
Safety data sheet according to 29 CFR 1910.1200 RC-886 - WHITE SEAL PLUS SECTION 5: FIRE-FIGHTING MEASURES 5.1 Suitable (and unsuitable) extinguishing media: 5.2 Product is non-flammable under normal conditions of storage, manipulation and use. In the case of inflammation as a result of improper manipulation, storage or use preferably use polyvalent powder extinguishers (ABC powder), in accordance with the Regulation on fire protection systems.
PAGE 4
Safety data sheet according to 29 CFR 1910.1200 RC-886 - WHITE SEAL PLUS SECTION 7: HANDLING AND STORAGE (continued) Avoid sources of heat, radiation, static electricity and contact with food. For additional information see subsection 10.5 7.3 Specific end use(s): Except for the instructions already specified it is not necessary to provide any special recommendation regarding the uses of this product. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.
PAGE 5
Safety data sheet according to 29 CFR 1910.1200 RC-886 - WHITE SEAL PLUS SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION (continued) Pictogram PPE Remarks Safety footwear for protection against chemical Replace boots at any sign of deterioration. Use foot protection in accordance with risk manufacturer´s use limitations and OSHA standard 1910.136 (29CFR) Mandatory foot protection F.
PAGE 6
Safety data sheet according to 29 CFR 1910.1200 RC-886 - WHITE SEAL PLUS SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES (continued) Explosive properties: Non-applicable * Oxidising properties: Non-applicable * Flammability: Flash Point: Non Flammable (>199.4 ºF) Flammability (solid, gas): Non-applicable * Autoignition temperature: 473 ºF Lower flammability limit: Non-applicable * Upper flammability limit: Non-applicable * Explosive: 9.
PAGE 7
Safety data sheet according to 29 CFR 1910.1200 RC-886 - WHITE SEAL PLUS SECTION 11: TOXICOLOGICAL INFORMATION (continued) B- Inhalation (acute effect): - Acute toxicity : Based on available data, the classification criteria are not met, as it does not contain substances classified as dangerous for inhalation. For more information see section 3.
PAGE 8
Safety data sheet according to 29 CFR 1910.1200 RC-886 - WHITE SEAL PLUS SECTION 12: ECOLOGICAL INFORMATION (continued) 12.
PAGE 9
Safety data sheet according to 29 CFR 1910.