Datasheet

LAN protocols
ARP, proxy ARP, BOOTP, LANCAPI, DHCP, DNS, HTTP, HTTPS, IP, ICMP, NTP/SNTP, NetBIOS, PPPoE (server), RADIUS, RIP-1, RIP-2, RTP, SIP, SNMP,
TCP, TFTP, UDP, VRRP
IP
WAN protocols
PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP), RIP-1, RIP-2, VLAN, IPEthernet
1TR6, DSS1 (Euro-ISDN), PPP, X75, HDLC, ML-PPP, V.110/GSM/HSCSDISDN
WAN operating mode
ADSL1, ADSL2 or ADSL2+ with external ADSL2+ modemxDSL (ext. modem)
UMTS/HSDPA with external module at the USB interfaceUMTS/HSDPA* (ext. module)
ISDN data or voice usage via internal ISDN interfaceISDN
Analog or GPRS operation via serial interfaceAnalog/GPRS (ext. modem)
A UMTS USB modem is not supplied. Supported UMTS USB modems at www.lancom.eu/umts-support*) Note:
Interfaces
10/100/1000 Mbps Gigabit EthernetWAN: Ethernet
3 individual 10/100/1000 Mbps Ethernet ports; up to 3 ports can be switched as additional WAN ports with load balancing. Ethernet ports can be
electrically disabled within LCOS configuration. The ports support energy saving according to IEEE 802.3az
Ethernet ports
Each Ethernet port can be freely configured (LAN, DMZ, WAN, monitor port, off). LAN ports can be operated as a switch or separately. Additionally,
external DSL modems or termination routers can be operated as a WAN port with load balancing and policy-based routing. DMZ ports can be
operated with their own IP address range without NAT
Port configuration
USB 2.0 hi-speed host port for connecting USB printers (USB print server), serial devices (COM port server), USB data storage (FAT file system) or
supported 3G USB modems; bi-directional data exchange is possible*
USB 2.0 host port
ISDN BRI port (S0 bus)ISDN
Serial configuration interface / COM port (8 pin Mini-DIN): 9,600 - 115,000 baud, suitable for optional connection of analog/GPRS modems. Supports
internal COM port server and allows for transparent asynchronous transmission of serial data via TCP
Serial interface
A UMTS USB modem is not supplied. Supported UMTS USB modems at www.lancom.eu/umts-support*) Note
LCMS (LANCOM Management System)
Configuration program for Microsoft Windows, incl. convenient Setup Wizards. Optional group configuration, simultaneous remote configuration
and management of multiple devices over ISDN dial-in or IP connection (HTTPS, HTTP, TFTP). A tree view of the setting pages like in WEBconfig
provides quick access to all settings in the configuration window. Password fields which optionally display the password in plain text and can
generate complex passwords. Configuration program properties per project or user. Automatic storage of the current configuration before firmware
updates. Exchange of configuration files between similar devices, e.g. for migrating existing configurations to new LANCOM products. Detection
and display of the LANCOM managed switches. Extensive application help for LANconfig and parameter help for device configuration. LANCOM
QuickFinder as search filter within LANconfig and device configurations that reduces the view to devices with matching properties
LANconfig
Monitoring application for Microsoft Windows for (remote) surveillance and logging of the status of LANCOM devices and connections, incl. PING
diagnosis and TRACE with filters and save to file. Search function within TRACE tasks. Wizards for standard diagnostics. Export of diagnostic files
for support purposes (including bootlog, sysinfo and device configuration without passwords). Graphic display of key values (marked with an icon
in LANmonitor view) over time as well as table for minimum, maximum and average in a separate window, e. g. for Rx, Tx, CPU load, free memory.
Monitoring of the LANCOM managed switches. Flick easily through different search results by LANCOM QuickFinder
LANmonitor
Graphical user interface for configuring the object-oriented firewall in LANconfig: Tabular presentation with symbols for rapid understanding of
objects, choice of symbols for objects, objects for actions/Quality of Service/remote sites/services, default objects for common scenarios, individual
object definition (e.g. for user groups)
Firwall GUI
Voluntary automatic updates for LCMS. Search online for LCOS updates for devices managed by LANconfig on the myLANCOM download server
(myLANCOM account mandatory). Updates can be applied directly after the download or at a later time
Automatic software update
Management
Integrated web server for the configuration of LANCOM devices via Internet browsers with HTTPS or HTTP. Similar to LANconfig with a system
overview, syslog and events display, symbols in the menu tree, quick access with side tabs. WEBconfig also features Wizards for basic configuration,
security, Internet access, LAN-LAN coupling. Online help for parameters in LCOS menu tree
WEBconfig
During rollout devices can be preset with project- or customer-specific settings. Up to two boot- and reset-persistent memory spaces can store
customized configurations for customer-specific standard settings (memory space '1') or as a rollout configuration (memory space '2'). A further
option is the storage of a persistent standard certificate for the authentication of connections during rollouts
Alternative boot configuration
Automtatic upload of appropriate firmware and configuration files on insertion of USB memory (FAT filesystem) into USB interfaces of LANCOM
routers with factory settings. The function can be activated to be used during operation of configured devices. The router checks the files’ dates
and versions against the current firmware before upload
Automatic update from USB
LANCOM 1631E
Features as of: LCOS 8.60