Installation Instructions

LANCOM vRouter Installation Guide – Initial setup

Initial setup

A LANCOM vRouter can be conﬁgured via the local area network (LAN).

Make sure that the computer you are using for the conﬁguration is on the

same LAN as the vRouter. If a DHCP server is active on the same LAN, the

vRouter is automatically given an IP address where it can be reached (and

found in LANconﬁg). If the vRouter was installed with an IP address, this

can be used to access the device. After the initial setup, the vRouter can (if

applicable) be integrated into the LANCOM Management Cloud.

The following options are available for the initial setup:

A LANconﬁg

A WEBconﬁg

Conﬁguration with LANconﬁg

LANconﬁg is a part of LANtools, the free LANCOM solution package.

LANconﬁg has a wide range of applications, from the user-friendly commis-

sioning of a single device with various Installation Wizards, to the holistic

management of several devices. It is available on the LANCOM website

free of charge.

Basic settings

After starting, LANconﬁg automatically searches the local network for new

devices and adds them to the overview.

In the overview, you invoke a context menu for the device with a simple

right-click of the mouse. This menu provides the options to Conﬁgure the

device or to start a Setup Wizard.