Installation Instructions

19
LANCOM vRouter Installation Guide – Initial setup
EN EN
Configuration with WEBconfig
WEBconfig is the web-based configuration interface of LCOS. To start the
configuration in WEBconfig, simply open a web browser and type in the IP
address assigned during the installation to your browser's address bar.
Basic settings
If the device has not yet been configured (e.g. during deployment on
the ESXi or Hyper-V server), a basic setup wizard starts automatically for
the configuration of basic parameters such as the main device password,
device name, IP address, etc).
4
The main device password is essential for resetting the vRouter.
After running the basic setup wizard, you can continue with the
configuration either manually or by means of the other Wizards.