Installation Instructions

LANCOM vRouter Installation Guide – Further information

Further information

This chapter contains further information on the administration of the

LANCOM vRouter. This includes integrating the vRouter into the LANCOM

Management Cloud and resetting the vRouter.

Resetting the vRouter

If you want to reconﬁgure the vRouter irrespective of any settings you have

made, you can reset the vRouter to its default settings without affecting

the license. You can perform the reset in the following ways:

Reset via the command line interface (CLI)

Open the CLI for the vRouter on the ESXi server or Hyper-V server, or

connect to the vRouter via an SSH connection. Once you have logged

on, you perform the reset with the command do /other/reset. If a main

password has been set for the device, this is will be requested before the

command is executed. After resetting, the vRouter boots.

Resetting the vRouter deletes all of the conﬁguration settings, passwords

and certiﬁcates.

Resetting via the command line interface (CLI) while retaining

certiﬁcates and the main device password

In order to retain the main password and any uploaded certiﬁcates on the

vRouter, you execute a command in the command line interface of the

vRouter. Open the CLI for the vRouter on the ESXi server or Hyper-V server,

or connect to the vRouter via an SSH connection. After logging on, enter

the following command from the root of the directory tree: default -r .