manual

Note:
Adding extra M3 screws to secure
the ODD for traveling.
1. Loosing all screws on the
bottom panel, then turn the
HDD cage 180 degree.
2. Secure all screws to fix the
HDD cage.
Cable management
ODD
ODD
Disassemble the ODD
Pull and hold the plastic handle first,
and push the ODD towards the front
panel.
ODD
ODD installation
1. Fasten the HDD screws with
anti-vibration rubber rings to the
HDD.
2. Place the HDD into the HDD cage
with the anti-vibration rings.
anti-vibration rings fix into the
slot.
Adding another screws on
both sides of HDD brackets
to prevent the HDD loosing
by an accidental bump.
2. Fasten four thumb-screws
to secure.
M/B tray with cable
management clips
1. Push in gently.
Note:
Note:
HDD cage can be
turned 180 degree.
Pre-drilled holes for
water-cooling system
tube
Using the tool to poke the
water holes
Please be careful while
handing to avoid an
incised wound.