Manual

ManualsBrandsLand of Nod ManualsFurnitureLOW-RISE CRIB

The Land of Nod

8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: customerservice@landofnod.com • www.landofnod.com

Low Rise Crib

Assembly Instructions

Page 1 of 6

Made in USA - r05

1 - Hex Wrench

1 - Allen Wrench

4 - Hex Bolts 16 - Lock Washers

16 - Decorative Bolts (50mm)

This page lists the contents included in

the box. Please take time to identify the

hardware as well as the individual com-

ponents of the product. As you unpack

and prepare for assembly, place the

contents on a carpeted or padded area to

protect them from damage. Please

follow the assembly instructions closely.

Improper assembly can result in personal

or property damage.

Note: 2 adults are required to safely

assemble this product.

NOTE: DO NOT USE

POWER TOOLS

2 - Headboard

Panels

1 - Mattress

Support

1 - Toddler rail

(sold separately)

2 - Side

Panels

2 - Bases

Summary of content (6 pages)

PAGE 1
Low Rise Crib Assembly Instructions This page lists the contents included in the box. Please take time to identify the hardware as well as the individual components of the product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Please follow the assembly instructions closely. Improper assembly can result in personal or property damage. Note: 2 adults are required to safely assemble this product.
PAGE 2
Low Rise Crib Assembly Instructions ! 1 2 Mount one side panel to the rear posts of the headboard panels. Use 4 decorative bolts and 4 lock washers to LOOSELY fasten the side panel to the headboard posts. DO NOT tighten the bolts until instructed in step 3. Install the mattress support in the crib with the flat side up. Extend the mounting flange on each corner and attach the spring to headboard and footboard at the desired level using 4 hex bolts and hex wrench provided.
PAGE 3
Low Rise Crib Assembly Instructions Mount the remaining side panel to the posts of the headboards. Use 4 decorative bolts and 4 lock washers to fasten the side panel to the posts. At this point fully tighten all bolts, taking care not to apply excessive force, using the allen wrench provided. 3 ! 4 With assistance of another adult, flip the assembly upside down. Attach the 2 bases with 8 decorative bolts and 8 lock washers, securing all bolts with the allen wrench. Assembly is now complete.
PAGE 4
Low Rise Crib Assembly Instructions ASSEMBLY NOTES & TIPS Bolts – DO NOT FORCE If there is resistance when you are starting a bolt, back it out and try again. Sometimes there is machining debris in between the threads that impedes the bolt from going into the insert, but it can usually be cleared by gently re-starting the bolt. It may take more than one try. Forcing the bolt into the thread when there is resistance may compromise the strength/integrity of the threaded insert.
PAGE 5
Low Rise Crib Assembly Instructions ! WARNING: - Failure to follow these warnings and assembly instructions could result in serious injury or death. - Read all instructions before assembling crib. Keep instructions for future use. WARNING: ! -Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under an infant.
PAGE 6
Low Rise Crib Assembly Instructions Once the crib is in use, periodically check to make sure all bolts are tight, and tighten as necessary. For future use, keep these instructions in the plastic bag attached to the mattress support spring. MAINTENANCE Upon completion of assembly be sure all screws, bolts and fastening devices have been tightened securely. Periodically repeat this check to make sure all screws, bolts and fastening devices are tight.