Tiller Specification Sheet

Rotary Tillers, Reverse Tine Rotation

Features and Benefits

Designs, speciﬁcations, features and information are subject to change without notice.

RTR10 Series

Features Benefits

American made Many tillers are imported. American made means better parts availability.

Gearbox Warranty 5 Years on housing, seals, & bearings. shows our confidence in the product.

Working widths 42”, 50”, 58” to meet specific customer needs.

Tractor HP range 17-25 HP

Reverse tilling action Reverse action ‘sucks’ tiller into ground, does not walk on top of hard ground like

forward rotation tillers can.

Front deﬂector Front deflector is flexible to take the beating from rocks or debris.

Formed and reinforced rear

deﬂector

Keeps dirt in and leaves a level finish. Forming gives deflector additional strength.

Adjustable deflector allows for various finish results.

Adjustable skid shoes Control depth with seven adjustments.

Solid rotor shaft 1 3/4” Solid steel rotor shaft for strength.

Double lip seal on rotor bearing Double lip seal helps keep the dirt out and the grease in.

4 ‘C’ shaped heat-treated

tines per ﬂange

‘C’ Shaped tines require less HP to move through the ground.

15” Rotor swing diameter For deep tilling and turning the soil over faster.

6 1/2” Digging depth For deep soil penetration.

Fully shielded shear pin or

slip-clutch driveline

Protects the gearbox and rotor shaft upon hitting obstructions. Slip-clutch saves

having to replace shear-pins.

Stamped chain cover Stamped forming gives the chain cover strength.

#80 Drive chain enclosed in oil bath Heavy drive chain stretches less, and oil bath keeps wear to a minimum.

Adjustable parking stand Allows for easy hook-up and storage.

Plate steel upper hitch Plate steel is stronger than flat bar type hitch.

Clevis lower hitch Provides additional strength and easy one person hook-up.

Adjustable lower hitch Offset unit to cover right tire track.

Offset Dimensions

42” width 16”-26” std. 13”-29” Maximum Right 23”-19” Maximum Left

50” width 25”-25” std. 18”-32” Maximum Right 32”-18” Maximum Left

58” width 29”-29” std. 22”-36” Maximum Right 36”-22” Maximum Left

Fits Land Pride Quick-Hitch Allows for quick and easy one person hook-up.

(Offset cannot be used with Quick-Hitch.)

311-431F continued on next page

4/08/08

PAGE 1
Features and Benefits Rotary Tillers, Reverse Tine Rotation RTR10 Series Features Benefits American made Many tillers are imported. American made means better parts availability. Gearbox Warranty 5 Years on housing, seals, & bearings. shows our confidence in the product. Working widths 42”, 50”, 58” to meet specific customer needs. Tractor HP range 17-25 HP Reverse tilling action Reverse action ‘sucks’ tiller into ground, does not walk on top of hard ground like forward rotation tillers can.
PAGE 2
Features and Benefits Rotary Tillers, Reverse Tine Rotation RTR15 Series Features Benefits American made Many tillers are imported. American made means better parts availability. Working widths 50”, 58” To meet specific customers needs. Tractor HP Range 17 - 35 HP Gearbox Warranty 5 Years on housings, seals, bearings. Shows our confidence in the product. Reverse tilling action Reverse action ‘sucks’ tiller into ground, does not walk on top of hard ground like forward rotation tillers can.