User's Manual

SR128 User Manual

Rev. A

Step 4: Reversed the Step to take out the SAM Card.

6. Operational Precautions

6.1. General Safety Instructions

The SR128 reader contains ESD sensitive components. When handling with the device, avoid in

contact with components especially the ICs on the boards. The operating voltage of the SR128 reader has

12VDC. The 10pin connector accepts 12VDC. Operating the SR128 reader other than the rated voltage will

experience performance deterioration or damage the reader.

6.2. Installation

The SR128 Reader uses inductive coupling to communicate with contactless cards. Therefore, the

reader is highly sensitive to ferrous or non-ferrous metal alike. Installation near to metal may affect

operating distance. It is important to keep a comfortable distance away these metal surfaces for optimum

performance.