Datasheet

CONSTRUCTION DETAILS:

Main Profile- Framework- Top/Bottom Cases, ABS Fan

Housing:

Multi Folded Automated Bending technology applied corner

profile system, provides a heavy duty structure results to high

load capacity of: 80 kgs on wall.

Monoblock multi folded top and bottom cases 20 times

bended resulted to a very heavy construction, tightly fixed to

the framework with fixing hardware , fully modular system

generated.

Top case has a ready Forced Ventilation (Fan Module)

integration ABS housing. Fan Module installation can be

operated either from roof or from internal side of cabinet.

The advantage of this system is, once the Fan Unit needs

maintenance or replacement and while the cabinet is carrying

integrated active and passive networking devices, than subject

to remove some of them to replace the Fan Module Unit.

Lande Cabinet Fan Module Unit access is from roof where no

interference with the already installed components inside

cabinets. Decorative Anthracite Grey ABS Fan Module

integration housing replacement is toolless. Where the Fan

Module to be inserted to the ABS Fan Module Housing

without any tool.

Top case integrated with a cable entry point with rubber edged

sliding mechanism with w:145mmxd:70mm allows proper

cabling insertion. The rubber edged mechanism works

between 0 to 50mm slide out.

After inserting the cables, the rubber edged mechanism holds

and fixes the cables in parallel preventing the cabinet from

dust entry.

Top Case, has ventilation slots at sides which provides passive

air ventilation via convention. Once the cabinet is not

equipped with forced ventilation ( Fan Units ), this ABS Fan

Housing also provides passive ventilation via convection.

Top Case and Main Frame junctions are closed with

Anthracite Grey PVC application for aesthetical appearance.

19” NETbox Wall Mounting Cabinets

FAMILY