User Manual

Align the antenna center point on the meter housing at the 2:30 o’clock posi-
tion, 1.5 cm clockwise past the nub on the outer meter cover
Gridstream RF Electric Endpoint Fix-up Antenna Installation Guide Landis+Gyr
8 98-1245 Rev AA Landis+Gyr Confidential Information
Figure 5. Installation On Gridstream RF Enhanced S4e Meters
Gridstream RF Integrated FOCUS AX/AX-SD Mounting Procedure
 NOTE: The passive antenna should be mounted within 5 mm (0.25") of the indicated location to
achieve specified performance.
1. Clean the meter cover where the flex antenna will be installed. Wipe the cover mounting area
with an alcohol wipe and let the area dry for one minute before proceeding with the installation.
2. Peel
the paper backing off of the adhesive tape (bottom of coupling antenna).
3. Firmly press the center of the antenna to the 5 o’clock
position of the meter while positioning
the upper edge of the antenna 3.3 cm below the top surface of the meter cover.
4. W
rap the cable tie through and over antenna guides, and around the meter. Thread the cable tie
into the mating end of itself.
Figure 6. Antenna Guides
5. Ensure that the cable tie is evenly placed over the antenna and cinch tight.