User Manual

Assembly Instructions, Kit, BLT5, MCC 97-1828 Rev AB Page 4 of 4
PROPRIETARY INFORMATION NOTICE: THIS DOCUMENT CONTAINS TRADE SECRETS AND CONFIDENTIAL INFORMATION OF LANDIS+GYR AND
SHALL NOT BE DUPLICATED IN WHOLE OR IN PART OR USED OR DISCLOSED FOR ANY PURPOSE OTHER THAN THAT APPROVED BY LANDIS+GYR.
4. Final Installation
4.1 From your MCC retro fit kit contained in a 9”x 12” zip lock bag, remove the new FCC, BLT5
Retrofit label, part number 23-1401. Next remove the label’s non-stick backing paper to expose
the adhesive side of the lablel then stick the new FCC label on the outside of the MCC’s
enclosure. The label should be placed on the enclosure’s painted exterior bottom where it will be
highly visible.
4.1 The MCC may be returned to service.
5. FCC
This product shall comply with the FCC requirements listed in United States CFR Title 47, Part 15.109,
15.209 and15.247.
The FCC tests should be performed with the meter module in the configuration s close to the typical
field configuration as possible.