User Manual
Table Of Contents
- 10-0097 - Manual Cover.pdf
- Concentrator Manual 98-1031-1
- Table of Contents
- Preface
- Pre-Installation
- Field Configuration
- Concentrator Installation
- RF Filter Enable/Disable and Battery Replacement Kit
- Performing System Upgrades
- Troubleshooting
- Product Specifications
- Compliance
- Bench Testing
- About Firmware
- About Programming and Diagnostic Cables
- Sample Survey Sheet
- Power Cable Installation
- Glossary
- Index
Chapter 3 - Field Configuration Landis+Gyr
18 98-1031 Rev AA Series IV Concentrator U and I Guide
5. Name the session in Hyperterminal.
Figure 3 - 5. Hyperterminal name session
6. Click the OK button.
7. Verify or configure the port settings as follows and click the OK button
• Bits per second: 9600 baud
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: None.
Figure 3 - 6. Set COM 1 Properties
8. Type ? to access the menu.