User Manual

Chapter 3 - Field Configuration Landis+Gyr
20 98-1031 Rev AA Series IV Concentrator U and I Guide
E. [g]+Log manager's (and CTS's) DMS node address [1..65534;default=65534]: 152
Input the assigned Node ID.
F. [h]+Event manager's DMS Net Address [1..4294967039;default=4294967039]: 20
Input the assigned Net ID again.
G. [i]+Event manager's DMS node address [1..65534;default=65534]: 152
Input the assigned Node ID again.
H. [m]*Minutes from GMT (0=GMT, 480=PST) [positive increments of 60] [-
720..720;default=480]: 420
Input the minutes from GMT.
I. [n]*Daylight savings type (0=none, 1=USA, 7=UK) [0..7;default=1]: 1
This value is always 1.
12. After you change the value, press the TAB key to refresh the page.
13. Press the Enter key to go to the next page.
14. Update the following field:
A. [e]+Lan Tx address for this MCC (0 = no Tx) [default=0]: 0
Always start with the number 400 (unless the concentrator address is 5 digits, then start with
4000), then append the concentrator ID.
For example, if the concentrator ID is 100016, then the Lan Tx address is 400100016.
15. Press the Enter key until you see a list of Network Filter configuration items.
.
Figure 3 - 9. Type 0 for disable
16. Type the letter J for Network Filter: Disable/Enable option.
17. Type 0 to disable network filtering, and then press [Enter]
18. Press the Escape key.