User Manual
Table Of Contents
- 10-0097 - Manual Cover.pdf
- Concentrator Manual 98-1031-1
- Table of Contents
- Preface
- Pre-Installation
- Field Configuration
- Concentrator Installation
- RF Filter Enable/Disable and Battery Replacement Kit
- Performing System Upgrades
- Troubleshooting
- Product Specifications
- Compliance
- Bench Testing
- About Firmware
- About Programming and Diagnostic Cables
- Sample Survey Sheet
- Power Cable Installation
- Glossary
- Index
Chapter 3 - Field Configuration Landis+Gyr
22 98-1031 Rev AA Series IV Concentrator U and I Guide
Disabling Network Filtering
With network filtering, you can configure the concentrator to accept all data packets, block certain
packets, or allow only certain packets. When another L+G customer is nearby, set your network to
not pick up the other utility’s one-way reads.
1. Connect to the host via PuTTY or a similar telnet client.
Figure 3 - 12. Login using telnet client
2. Login as rdbms using password cellnet.
Figure 3 - 13. Login as rdbms user