User Manual
Table Of Contents
- 10-0097 - Manual Cover.pdf
- Concentrator Manual 98-1031-1
- Table of Contents
- Preface
- Pre-Installation
- Field Configuration
- Concentrator Installation
- RF Filter Enable/Disable and Battery Replacement Kit
- Performing System Upgrades
- Troubleshooting
- Product Specifications
- Compliance
- Bench Testing
- About Firmware
- About Programming and Diagnostic Cables
- Sample Survey Sheet
- Power Cable Installation
- Glossary
- Index
Chapter 4 - Concentrator Installation Landis+Gyr
46 98-1031 Rev AA Series IV Concentrator U and I Guide
8. Re-install the photocell in the same manner.
9. Run the cable between the brackets and the concentrator enclosure.
10. Using the supplied UV rated tie wraps, secure the cable to the light head.
11. Connect the power plug to the bottom of the concentrator.
If you need a longer cable, you can build one using one of the approved AC
power cables, and a photocell power adapter.