User's Manual

`ÉääåÉí=t~íÉê=båÇéçáåí=fåëí~ää~íáçå=dìáÇÉ ^JN
APPENDIX A CRIMPING WIRES
Use this process to crimp wires for the Cellnet Water Endpoint.
CRIMPING WIRES
1 Push the wires to be connected as far as possible into the Scotchlok connector.
Figure A.1 Wires pushed into Scotchlok connector
2 Place the Scotchlok connector (with wires) into the jaws of the crimping tool.
Figure A.2 ScotchLok connector in crimping tool jaws
Always use 3M Parallel Jaw Crimping Tool 3M Model E-
9Y or equivalent.