User's Manual

`êáãéáåÖ=t áêÉë
`ÉääåÉí=t~íÉê=båÇéçáåí=fåëí~ää~íáçå=dìáÇÉ ^JP
5 For splice connections outside the CWE Remote enclosure, insert the entire
splice assembly into the silicone-filled splice enclosure. Close the cover with
leads exiting alternate sides
Figure A.5 Inserting splice assembly into silicone-filled splice enclosure
Cellnet strongly recommends a splice enclosure, particularly for Badger RTR
installations. Failure to use a splice enclosure may invalidate the manufacturer’s
warranty.
The 3M Gel splice connector is NOT reusable. Replace the splice if
necessary.