User Manual

Table Of Contents
Landis+Gyr Chapter 8 - Dresser Roots Installation
Installation Guide 98-1135 Rev AB 101
Dial Wheel Installation
After the battery is installed, prepare to install the Dial Wheel onto the index. This step can be
accomplished with the index on the meter, or on a meter index that is not installed on a meter.
Figure 8 - 5. Dial Wheel Kit (note Dial Wheel Pin Tab Hole indentations); Black Dial Wheel Pin
Some American indexes have square-edge index pointers that require updated dial wheel pins.
Special dial wheel pins are molded with gray-colored material for differentiation. Examples of the
round-edge and square-edge index pointers and the modified pin for use with the square-edge
pointers appear below. The gray pin should only be used with square-edge index pointers. The black
pin can only be used with round-edge index pointers.
Figure 8 - 6. Round-edge vs. Square-edge American Index Pointers; Gray Dial Wheel Pin
NOTE: Kit 45-2400 includes two thread rolling screws. These should be used in place of the two
machine screws (22-1176) only to mount the index of 01-1337 and if there is no metal insert within
E 22-1177 Screw, 1/4-20 x 5/8", FILH, PHH & SLH, STL 4
Table 8 - 2. M120-1 Dial Wheel and Seals Hardware Kit #45-1219
Table 8 - 3. American Index, Pointers Removed, GE AMR (Kit #45-2400)
Item Number Item Name Qty.
01-1337 Index, Dial, American Res Gas, Pointers Removed 1
22-1426 Screw, M4-.7 x 8mm, Pan Philips, Thread Rolling, Steel, Zinc 2