User Manual

Table Of Contents
Chapter 8 - Dresser Roots Installation Landis+Gyr
102 98-1135 Rev AB Installation Guide
the index screw hole bosses.
Figure 8 - 7. Dial Wheel Pointer Slot
1. While holding the Dial Wheel, note the location of the Pointer Slot. With the index sitting on a
work surface, set the Dial Wheel on the index face with the pointer slot oriented towards the
pointer.
Figure 8 - 8. Dial Wheel with pointer slot positioned for pointer entrance
2. Slide the Dial Wheel toward the pointer on the test hand until the Dial Wheel center contacts the
pointer. The pointer center will gently impede the Dial Wheel. Do not force the Dial Wheel onto
the pointer center.
Figure 8 - 9. Dial Wheel placed on pointer
3. Take the Dial Wheel Pin and insert the pin into the Dial Wheel hole. Note the position of the
three tabs of the Dial Wheel pin. Use the plastic connecting strip to orient the Dial Wheel pin to
fit into the corresponding slot of the Dial Wheel Pin hole.