User Manual

Table Of Contents
Landis+Gyr Chapter 8 - Dresser Roots Installation
Installation Guide 98-1135 Rev AB 105
Figure 8 - 14. A Screw-holding Screwdriver Will Simplify Installing This Mounting Screw
2. Install the remaining screws. If available, using a screw-holding screwdriver to install the lower
right-side module mounting screw will simplify this action. Tighten the screws to a torque rating
of 15 +/- 2 inch-pounds.
Figure 8 - 15. Index and Gridstream M120-1 Index Cover Installed
3. Install new tamper seals over the upper right and lower left mounting screws.
Figure 8 - 16. Meter module with security seals installed