User Manual

Table Of Contents
Chapter 1 - Pre-Installation Landis+Gyr
10 98-1135 Rev AB Installation Guide
Required Installation Tools
Figure 1 - 1. Examples of some required tools
Recommended Torque Driver Source:
Mountz
1080 N. 11th St. San Jose, CA 95112
Phone: 877-833-1704 or 408-292-2214
Fax: 408-292-2733
e-mail:
sales@mountztorque.com
Required Parts
For diaphragm meters an index cover kit, dial wheel, and GPR brackets kit are needed.
Table 1-1. Typical Gas Meter Module Installation Tool List
Torx Pin Head Driver, T10 Phillips Screwdriver, #2
Flat-tip Screwdriver, 3/16 inch x 4 inch Flat-tip Screwdriver, 1/4 inch x 5 inch
Phillips Screwdriver, #0, precision
Torque Driver / Wrench, 0.5 inch-
pounds to 20 foot-pounds
Torx Pin Head Driver, T15 5/16 Combination Wrench
Wire Brush Awl, Heavy duty
Scraper, Brass, 1.25 inch wide