User Manual

Table Of Contents
A
Installation Guide 98-1135 Rev AB 113
GPR Waterproofing
Applying Water Sealant to Circuit Board Connections
CRC Di-Electric Grease Compound is recommended as a sealant to prevent water intrusion into the
GPR Pulse Input and Battery circuit board connections.
Figure A - 1. CRC Di-Electric Grease Compound
NOTE: Novagard® G661 is also approved as an electrical sealant and is available in 5.3 ounce
tubes. It has a shelf-life of eighteen (18) months from the date of manufacture, as indicated by the
lot number, when stored in the original, unopened container at, or below, 100ºF.
Novagard® G661 may be ordered from:
Novagard Solutions®
5109 Hamilton Avenue
Cleveland, OH 44114
Phone: (216) 881-3890 Facsimile: (216) 881-6977
www.Novagard.com
NOTE: Dow Corning 4 Electrical Insulating Compound is approved as an electrical sealant and may
be ordered from:
Ellsworth Adhesives
Part #: 4 CMPD 150G TUBE
W129 N10825 Washington Dr.
Germantown, WI 53022
Phone: 1-877-454-9224
Website: http://www.ellsworth.com/Home.html