User Manual

Table Of Contents
Appendix A - GPR Waterproofing Landis+Gyr
114 98-1135 Rev AB Installation Guide
NOTE: CRC Di-Electric Grease Compound is electrical grade.
1. Liberally apply CRC Di-Electric Grease Compound (“the compound”) to the Battery and GPR
Pulse Input circuit board connectors as shown in Figure A - 2 and Figure A - 3.
Figure A - 2. Apply the Compound to the Battery Connector
Figure A - 3. Apply the Compound to the GPR Pulse Input Connector
2. Force the compound between the connector pins with a cotton tipped swab or other suitable
applicator as shown in Figure A - 4.
Figure A - 4. Force the Compound between Connector Pins
GPR Pulse Input
Connector
Battery Connection