User Manual

Table Of Contents
Landis+Gyr Chapter 1 - Pre-Installation
Installation Guide 98-1135 Rev AB 23
Rotary Required Materials
For rotary meters a cable, GPR, and bracket kit are needed.
Cable
Select one based on meter type and its interface.
GPR+ Brackets Kit
NOTE: Tie wrap 22-1417 is needed to tie the cables and is not included in kit.
Table 1-26. Rotary Gas Meter Module Installation Tool List
Torx Pin Head Driver, T10 Flat-tip Screwdriver, 1/4 inch x 5 inch
Torx Pin Head Driver, T15
Wire Cutter\Stripper for 19-26-AWG solid
conductor wire
Flat-tip Screwdriver, 3/16 inch x 4 inch Badger Field Splice Kit 62084-001
Torque Driver \ Wrench, 0.5 inch-pounds to 20 foot-
pounds
3M Scotchlok E-9Y Crimping Tool or Equivalent
Phillips Screwdriver, #2 3M Scotchlok, Model UY2 or Equivalent
Table 1-27. GPR Rotary Meter Cables
Part # Description
19-2330 Cable Assembly, Flying Leads, Single Output, Gas C&I 2-Way
19-2331 Cable Assy, Rotary, Flying Leads, Double Output, Gas C&I 2-Way
19-2332 Cable Assy, Rotary, Gas C&I 2-Way
Table 1-28. GPR Installation Components for Rotary Gas Meters
Part # Description
40-1672 Assy, 2-Way C&I Gas Module
45-0080 GPR Pipe Mount Kit, 2-3 Inch
22-1417 TIE WRAP, 10 inch, UV, NYLON, BLACK