User Manual

Table Of Contents
Chapter 3 - American GPR Index Cover & GPR Install Landis+Gyr
44 98-1135 Rev AB Installation Guide
Figure 3 - 31. GPR at Right Rear - Using 28-1440 Bracket
Figure 3 - 32. GPR at C enter Rear - Using 28-1441Bracket
1. Lay the GPR face down. Remove the two screws and washers holding the two brackets together
as shown in Figure 3 - 33.
Figure 3 - 33. GPR Bracket Disassembly
2. Determine the appropriate GPR direction.
3. Install the two screws and lock washers. Tighten the screws to 30 inch-pounds (+/- 2 inch-
pounds).
A CAUTION: If the meter’s pipe route prevents installing the GPR as described in this manual,
the GPR may be mounted in a remote location away from the meter, such as on a wall or a