User Manual

Table Of Contents
4
Installation Guide 98-1135 Rev AB 47
Rockwell GPR Index Cover &
GPR Install
Rockwell Index Cover & Gas Module Removal
Meter Preparation
1. Remove the tamper seals, screws, and index cover assembly from the meter.
If there is no Commercial Gas Module connected to the meter, it will appear as below.
Figure 4 - 1. Rockwell Large Diaphragm Meter Index Cover Front And Rear Views
Figure 4 - 2. Remove Index Cover Tamper Seals, Screws. and Index Cover
2. If the meter has a Commercial Gas Module, perform the following steps.
A. Remove the index cover tamper seals.
B. Remove the module bracket fasteners and carefully disconnect the module and index cover
assembly from the meter.
Index Cover
Screws
Index Cover
Tamper Seals