User Manual

Table Of Contents
Landis+Gyr Chapter 5 - Schlumberger GPR Index Cover & GPR Install
Installation Guide 98-1135 Rev AB 65
Figure 5 - 17. Coil the Excess Cable
Figure 5 - 18. Route and Attach the Excess Cable
6. Attach the excess coiled cable to the GPR bracket with a black nylon zip tie as shown in the
previous figures.
A CAUTION: The cable should slope downward and away from the index cover to aid the water
tight strain relief in preventing water from entering the cover. Do NOT crimp or pull the cable
tight.
7. Insert tamper seals into the tamper cups.
Cable must slope
down and away
from cover