User Manual

Table Of Contents
6
Installation Guide 98-1135 Rev AB 69
Sprague GPR Index Cover &
GPR Install
Sprague Index Cover & Gas Module Removal
Meter Preparation
1. Remove the tamper seals, screws, and index cover assembly from the meter.
2. If a Commercial Gas Module is present, remove the tamper seals and screws.
Figure 6 - 1. Sprague Large Diaphragm Meter with Commercial Gas Module
3. Remove the bracket and Index Cover assembly. Take care not to damage the meter index.
Figure 6 - 2. Remove Tamper Seals and Screws – Carefully Remove Module & Bracket Assembly
Tamper Seal
Tamper Seal