User Manual

Table Of Contents
Chapter 7 - Electronic Pulser Installation Landis+Gyr
86 98-1135 Rev AB Installation Guide
BOTTOM of the enclosure to prevent dirt and moisture from collecting inside the enclosure.
Figure 7 - 2. Enclosure Cable Entry Notch
C. Using a T-10 security Torx driver, tighten the screws to 10 in-lbs (+/- 2 in-lbs). Tighten the
screws using a crisscross pattern to secure the enclosure to the bracket.
Figure 7 - 3. Attach GPR to Mounting Bracket