User Manual

Table Of Contents
Chapter 7 - Electronic Pulser Installation Landis+Gyr
96 98-1135 Rev AB Installation Guide
Figure 7 - 11. Flying Leads Wiring for Two Form-A Volume Inputs and Alarm
NOTE: The cable connector is shown downside up.
Table 7 - 4. Two Form-A and Alarm Wiring Definitions
GPR 19-2331 Cable Pulser Output Connector
GPR Sensor
Connector Pin #
Signal and Description Lead Color Terminal Description
1
CHAN A NO, channel A
normally open
ORANGE Y1 Normally Open
2
CHAN A COM, Channel
A common
WHITE/ORANGE K1 Common
3 N/C N/A N/A Not Applicable
4
CHAN A TAMPER TEST,
Channel A tamper test
WHITE/GREEN Y1 Tamper Test
5Ground DrainDrain
Connection is
Optional
6
CHAN B NO, Channel B
normally open
BLUE Y2 Normally Open