Installation Guide Part 2

d~ë=jÉíÉê=mêÉé~ê~íáçå=mêçÖê~ã=EdmêÉéF
`ÉääåÉí=d~ë=jçÇìäÉ=~åÇ=jÉíÉê=fåëí~ää~íáçå=dìáÇÉ VJNV
eitherrescanorre‐enterthemeterIDvalueinthisfield.Moduleprogramming
cannotberesumeduntilthemeterIDfieldpopulatedmatchestheutilityspecific
format.
Figure 9.13 Error Message Displayed when The Wrong Meter ID Format Is Entered
4Scan(enter)thepowerLANlabelintheLANAddressfield.
“GPrep”comparesthevalueenteredinthisfieldwiththeLANAddress
programmedinthemodule.Similartotheinspectionsection,anydiscrepancies
inthevaluesarerejected.
Figure 9.14 Error Message Displayed if The Scanned Power LAN Does Not Match Programmed
SelecttheRolloverPointandMeterConstant(meterspecificvalues)priorto
programmingthemodulefromthedropdownwindows.GPrepdisplaysa
messagewindowverifyingthattheoperatorintendstochangetheRolloverpoint
andmeterconstant.GPrepkeepsthelastvalueenteredintherolloverpointand
meterconstantfi
eldsasthede
faultvalue.
If you do not know what to enter for the Rollover Point or Meter Constant STOP!
Contact someone that does know or contact Cellnet Customer Support. The wrong
data entered in these fields significantly affects the billing read provided to the
utility.