Certification Exhibit FCC ID: R7PSSMM1TRP FCC Rule Part: 15.247 ACS Project Number: 11-0372 Manufacturer: Landis+Gyr Technology, Inc. Model: Elster Solid State Meter Module Manual 5015 B.U.
0 12 Elster Solid State Meter Module Quick Start Guide D ra ft 12 / 8/ Publication: 98-1258 Rev AB LANDIS+GYR CONFIDENTIAL INFORMATION
Limitation on Warranties and Liability Information in this document is subject to change without notice. This manual or any part of it thereof may not be reproduced in any form unless permitted by contract or by written permission of Landis+Gyr.
Elster Solid State Meter Module Quick Start Guide Overview D ra ft 12 / 8/ 20 12 The Landis+Gyr Solid State Meter Module (SSMM) is designed to provide active energy (Kilo-Watt hour) data from Elster ALPHA Plus meters for use in residential and industrial commercial services. Figure 1 - 1.
Elster Solid State Meter Module Quick Start Guide Landis+Gyr Required Software To work with the endpoint, you need at least one of the following software tools and documentation: • UtiliNet Solution Center (USC) • Meter Master Lite software • • Meter Master Lite Quick Start Guide, publication number 98-0071 Elster ALPHA Plus software Landis+Gyr recommends you have RF Verify software and the RF Verify User Guide, publication number 98-0069.
Landis+Gyr Elster Solid State Meter Module Quick Start Guide LAN ID The LAN ID is a unique identifier for each Landis+Gyr endpoint. Landis+Gyr provides the LAN address. You cannot change the LAN ID of a radio. Features and Functions Endpoint Registration The endpoint is automatically registered with the host system. No special tools are needed during installation.
Elster Solid State Meter Module Quick Start Guide • LAN ID • Total count • Last ten interval counts Landis+Gyr Customer Service Contact Landis+Gyr Customer Support at solutionsupport.na@landisgyr.com or call 888-390-5733 with any questions or problems for guidance through the troubleshooting process. 20 12 Compliance FCC Class B This device complies with Part 15 of the FCC rules.
Landis+Gyr Elster Solid State Meter Module Quick Start Guide RF Exposure In accordance with FCC requirements of human exposure to radio frequency fields, the radiating element shall be installed such that a minimum separation distance of 20 centimeters will be maintained. Host FCC Label Requirement In the final installation, the following information must be visible: “Contains FCC ID: R7PSSMM1TRP This device complies with Part 15 of the FCC rules.
Elster Solid State Meter Module Quick Start Guide Landis+Gyr Product Specifications Table 3. Elster Solid State Meter Module Specifications Specification Value or Range Elster ALPHA Plus Supported Meter Forms Compatible Meters Class 1S 200 1S 320 2S 200 2S 320 3S 20 4S 20 35S 20 35A 20 12S 200 12S 320 13S 200 13S 320 13A 100 D ra ft 12 / 8/ NOTE: Contact Elster Electricity for additional forms.
Landis+Gyr Elster Solid State Meter Module Quick Start Guide Table 3. Elster Solid State Meter Module Specifications Standards Compliance Specification Value or Range FCC Title 47 CFR Part 15 Subpart B & C Radiated and Conducted Emissions IEC 61000 4-2,3,4,5 Electromagnetic Compatibility ANSI C12.1-2011 Electricity Metering ANSI C12.20-2002 Electricity Meters Standard ANSI C37.90.
Elster Solid State Meter Module Quick Start Guide Landis+Gyr Physical Dimensions The ALPHA Plus meter fits all standard S-base services. Meters with an A-base are also available. Figure 1 - 1 illustrates the S-base meter type and dimensions. NOTE: The dimensions are for reference purposes only and should not be used for construction. 12 / 8/ 20 12 Figure 1 - 1.
Elster Solid State Meter Module Quick Start Guide 8/ 20 12 Landis+Gyr D ra ft 12 / Figure 1 - 2. A-base Meter Type and Dimensions in Inches (millimeters) - Front and Side View Figure 1 - 3.
Landis+Gyr D ra ft 12 / 8/ 20 12 Elster Solid State Meter Module Quick Start Guide 12 98-1258 Rev AB Landis+Gyr Confidential Information
