Installation Manual

16
When using an external radio,
"PROT1 Baudrate (Modem)"
Select the baud rate of the
radio used in.
Set “GPS” + “GLONASS” or
“GPS” + “Beidou” to “ON”.
*If other satellites are turned on,
data transmission may not be
possible depending on the
specifications of the radio.
* It depends on the specifications
of the radio used.
When using "SC Rover" as a
base station, the correction
wave to be transmitted is fixed
to "RTCM32MSM4".
Please enter the following information
into Base station:
Latitude (Lat)
… Degree (Decimal number)
Longitude (Lon)
… Degree (Decimal number)
Elliptical height (Alt)
…Meter
Confirm the input value and tap
"Save" .
Reference Station System (Base Station) : Setup